Corner Steady Accessories

View:
Sort by: 

50MM PLASTIC END CAPS SUITS ALQR

Product Code: PLASCAPS50X50

Features & Specifications Plastic End Caps (2) 50mm Square. for ALQR

4.95

$4.95

In Stock

Request Info


60MM PLASTIC END CAPS SUITS ASSW-L/M

Product Code: PLASCAPS60X60

Features & Specifications Plastic End Caps (2) 70mm Square. for ASSW-L/M

3.95

$3.95

In Stock

Request Info


70MM PLASTIC END CAPS SUITS ASSW-DL/H

Product Code: PLASCAPS70X70

Features & Specifications Plastic End Caps (2) 70mm Square. for ASSW-DL/H

4.95

$4.95

In Stock

Request Info


AL-KO BIGFOOT CORNER STEADY FOOT - SET OF FOUR

Product Code: 655900

Features & Specifications Firm base for corner stead Automatically lower and raise with steady Large reinforced landing area Prevents sliding or sinking With its large reinforced landing area the AL-KO Big Foot prevents the steady legs from sliding or sinking, providing a firm safe base for your caravan. The AL-KO Big Foot automatically lowers and raises when corner steady is operated,...

49.95

$49.95

In Stock

Request Info


AL-KO BIGFOOT CORNER STEADY FOOT SINGLE UNIT

Product Code: 655900S

Features & Specifications AL-KO BIGFOOT CORNER STEADY FOOT SINGLE UNIT COMES WITH SPRING AND PIN

19.95

$19.95

In Stock

Request Info


4.95

$4.95

In Stock

Request Info


AL-KO HEX DRIVE JACK HANDLE 450MM SUIT DROP DOWN STEADIES

Product Code: 654845

Features & Specifications ALKO Winder Handle for Corner Steady - 450mm The 450mm AL-KO Winder Handle has a hex socket to suit the 19mm nuts on the popular ALKO Corner Steadies The winder handles are used to raise and lower each corner steady & the 450mm length is suitable where a long reach under the RV isn't required Hex Socket for 19mm Nut 450mm in Length Zinc plated

21.95

$21.95

In Stock

Request Info


AL-KO HEX DRIVE JACK HANDLE 800MM SUIT DROP DOWN STEADIES

Product Code: 654700

Features & Specifications ALKO Winder Handle for Corner Steady - 800mm The 800mm AL-KO Winder Handle has a hex socket to suit the 19mm nuts on the popular ALKO Corner Steadies The winder handles are used to raise and lower each corner steady & the 800mm length is suitable where a long reach under the RV isn't required Hex Socket for 19mm Nut 800mm in Length Zinc plated

19.95

$19.95

In Stock

Request Info


AL-KO HEX DRIVE OFFROAD JACK HANDLE 1150MM SUIT DROP DOWN STEADIES

Product Code: 654702

Features & Specifications ALKO Winder Handle for Corner Steady - 1500mm The 1500mm AL-KO Winder Handle has a hex socket to suit the 19mm nuts on the popular ALKO Corner Steadies The winder handles are used to raise and lower each corner steady & the 1500mm length is suitable where a long reach under the RV isn't required Hex Socket for 19mm Nut 1500mm in Length Zinc plated

19.95

$19.95

In Stock

Request Info


BRACKET FOR ALKO STEADYS

Product Code: 654885

Features & Specifications Mounting Bracket to suit AL-KO stabilizer/ corner drop down legs.

6.95

$6.95

In Stock

Request Info


COAST JACK PADS 80MM

Product Code: 450-00102

Features & Specifications Coast Jack Pads are designed to attach to most makes of corner stabilisers for extra stability on soft ground. Product Features: Made with durable plastic construction Easy to attach Universal fit Unique channel that prevents ants from crawling up stabiliser legs (when filled with water) Specifications: Dimensions (mm): 138(W) x 158(L) x 74(H) Set of 4...

60.00

$60.00

In Stock

Request Info


FIAMMA PLATES PRO SET OF4 INCL BOLTS

Product Code: 450-00127

Features & Specifications Kit of 4 anti-sinking bases supplied with 4 locks to be fastened to the caravans legs.Permanently secured even when travellingColour: GreyDim: 19 x 14.5cm

36.95

$36.95

In Stock

Request Info


JACK HANDLE

Product Code: JH

Features & Specifications Winder Handle, Easylift Rear Leg with 400mm reach for straight section.  

18.95

$18.95

In Stock

Request Info


JACK HANDLE 590MM SUITS HEX SUIT DRILL

Product Code: LH2MD

Features & Specifications M Series Hex head 19mm - Type Handle 590mm For use with a Drill To suit Adjustable Leg models - ALFM5 / ALRM5 / ALFM6 / ALRM6 Warning - Set Drill to lowest torque and speed setting, failure to do so may result in damage to lifting thread.

12.00

$12.00

In Stock

Request Info


JACK HANDLE LONG

Product Code: JHL

Features & Specifications Winder Handle, Easylift Rear Leg with 600mm reach for straight section.  

21.95

$21.95

In Stock

Request Info


JACK HANDLE SLOT TYPE SUITS DRILL

Product Code: LH2PD

Features & Specifications P Series Slotted Type Handle 570mm For use with a Drill To suit Adjustable Leg models - ALFP5 / ALRP5 / ALFP6 / ALRP6 Warning - Set Drill to lowest torque and speed setting, failure to do so may result in damage to lifting thread

11.00

$11.00

In Stock

Request Info


JACK HANDLE WITH HEX 700 MM LONG

Product Code: LH2M

Features & Specifications M Series Hex Head Handle - 19mm - length 700mm To suit Adjustable legs models - ALFM5 / ALRM5 / ALFM6 / ALRM6 / ALFM6BOGA

12.95

$12.95

In Stock

Request Info


JACK HANDLE WITH HEX 730 MM LONG

Product Code: LH3M

Features & Specifications M Series Hex Head Handle 19mm - 900mm Suits Adjustable Leg models - ALFM5 / ALRM5 / ALFM6 / ALRM6 / ALFM6BOGA

13.50

$13.50

On Backorder

Request Info


JACK PAD STABILISER 4PK

Product Code: 44595

Features & Specifications Stabiliser Jack Pads (Set of 4) fit most 5th-wheel jacks. They can be used with swing arm support, trailer tongue, Stacks Jacks and awning support rods. Features Prevents Jacks from Sinking Keeps your RV Stable and Level

44.95

$44.95

On Backorder

Request Info


LEG JACK PLATES 4PK

Product Code: SLP04

Features & Specifications Australian Made Caravan/Camper Trailer Foot Plates Sold as a pack of 4 plates with nuts, bolts & washers Features: Australian Made Helps prevent your caravan, camper trailer or any type of trailer that uses corner steadies for support from sinking into soft ground. Create greater stability with a huge 180mm x 180mm foot print. Larger than any other plate on...

69.95

$69.95

In Stock

Request Info


LEG JACK PLATES 4PK BLACK

Product Code: SLP04B

Features & Specifications Australian Made Caravan/Camper Trailer Foot Plates Sold as a pack of 4 plates with nuts, bolts & washers Features: Australian Made Helps prevent your caravan, camper trailer or any type of trailer that uses corner steadies for support from sinking into soft ground. Create greater stability with a huge 180mm x 180mm foot print. Larger than any other plate on...

69.95

$69.95

In Stock

Request Info


LOCK PIN FOR DROP LEG WITH LINCH PIN

Product Code: ASSW-LOCKINGPIN

Features & Specifications Drop Leg Locking Pin with Linch Pin

6.95

$6.95

In Stock

Request Info


MANUTEC HANDLE SET TO SUIT ALQR DROP LEG

Product Code: ALQR-HANDLE

Features & Specifications Handle Set to suit all models of ALQR Adjustable Legs Complete with Springs, Washers and Pins

19.95

$19.95

In Stock

Request Info


MANUTEC REPLACEMENT ALUMINIUM FOOT LARGE SUITS ALQR LEG STAND

Product Code: ALQR-LGEALUMFT

Features & Specifications Replacement foot to suit all Manutec quick release drop down legs popular on many Australian built caravans and camper trailers. Features: Aluminium Light Weight Moat feature to keeps ants off legs

14.95

$14.95

In Stock

Request Info


Items per page: